• Tel: +30 2410-575430

SHELTER

Main Features

Base frame

The base frame is made of hot dipped galvanized steel reinforced with hot dipped galvanized steel joints. The complete base is welded assembly and all welds are cleaned and treated with zinc primer..


Floor

18mm thick plywood is fastened directly to the upper part of the base frame. An antistatic floor vinyl sheet (2mm thick) is bonded to the face of the plywood. Alternatively, in the power generator shelters, a 3/5mm thick anti-slip aluminum plate is fastened to the upper part of the base frame..


Walls

The building walls are made of 80mm thick insulating polyurethane panels (polyurethane density 42kgr/m3) and panel joints are specially designed to ensure high waterproof performance. The thermal transmittance coefficient is K<0,21 Kcal/m2hC. The external panel cladding is made of 0.9mm thick hot dipped galvanized steel with Plastisol coating (200μm). The internal panel cladding is made of 0.5mm thick hot dipped galvanized steel coated with white polyester paint.


Roof

The roof is made of insulating polyurethane trapezoid panels (polyurethane density 42kgr/m3) with a mean thickness of 60mm. The thermal transmittance coefficient is K<0,29 Kcal/m2hC. The external panel cladding is made of 0.55mm thick hot dipped galvanized steel with Plastisol coating (200μm). The internal panel cladding is made of 0.5mm thick hot dipped galvanized steel coated with white polyester paint.


Door

The door and the frame are made of heavy duty aluminum profile. The profile has a polyamide insert between the external and internal frame in order to avoid cold bridges. Both door and door frame profiles are equipped with special EPDM profile to prevent the ingress of moisture and contaminates to the building.